A garage door is programmed by continuously pressing the learn button of your garage opener and when it flashes, press the open button on your garage remote control. After 2 minutes, test the open button, and if it opens, your garage door will be successfully programmed. Below, are the detailed steps for programming a garage door:
- You first confirm the compatibility of the remote control with that of the garage opener. To do this, you will make sure that the garage opener and the remote control are of the same brand. For the remote to work, it needs to be of the same brand as the opener.
- Find the learn button on your garage opener. A garage opener is usually installed on the wall next to the garage door. On the garage opener, there are buttons with different names. Locate the learn button here.
- You will then press the learn button continuously until it flashes a light. When it does this, press the open button immediately.
- Wait for 1-2 minutes on average and press the open button again. If the garage door opens, then your door is programmed successfully.
Didn't find a solution? we are here to help each other, you can ask here or search below.
Need a professional construction worker?
You are here